Is your AirPods pro only playing in one ear? Here are the best 10 fixes for this problem for your Apple AirPods pro.
You have no hope of hearing with the AirPods Pro when they’re only playing out of one ear. This is a common problem AirPods have encountered. It is easy to fix, just don’t worry.
It is known that AirPods Pro are the only true wireless headphones. Released by Apple , they have held steady. But how do you respond when you have only sound output for one of your AirPods?
This article shows you how to fix your earphones by following a few well-known home remedies. You should be finished shortly. Read: How To Fix iPhone Battery Drains Quickly.
First, we will look at the reason for why there is only one of your AirPods making sound.
Why are Your AirPods Pro Only Playing in One Ear
The reason your AirPods Pro won’t play any sound is due to a software issue. If your AirPods Pro doesn’t connect with your device, one AirPod will only play through one of the AirPods’ speakers.
You may also love to read: Facebook Page Ownership: Safe from Hackers
If your AirPods Pro isn’t close enough to your iPhone or any other device you have, it might start to reject AirPods. When your AirPods are too far away, your AirPods may play sound out of only one ear.
10 Ways to Fix AirPods Pro Only Playing in One Ear
1. Clean your AirPods Pro
One of the most prevalent reasons why AirPods Pro Only Playing In One Ear is dirt accumulating within the charging port.
Accumulated dirt and debris can prevent your AirPod from properly contacting the charging casing. Therefore, only one of the AirPods will charge, and the other will not.
To prevent damaging your AirPods Pro, make sure you always clean them after use and store them in the case to keep them safe. You should not just clean the AirPods but also the fact that they come with them.
If you want to clean the AirPods Pro, you can simply use a microfiber cloth. With this, you can easily clean your AirPods Pro without leaving any scrapes or scratches. This can also be used to dry the battery case to ensure that it will not conduct electricity during charge.
A clean cotton bud is another way of cleansing it. You may be able to clean the parts of your earbud that could not be accessed by a microfiber cloth.
But if cotton buds are unable to remove tiny debris, you may need to suck the AirPods in the right way and then proceed to blow it to gently remove even the smallest debris.
The reason why the “sucking” method has been so effective is that AirPods Pro accumulates ear wax, which causes any outgoing sound to be blocked.
Here is a video tutorial on How to do this perfectly:
Make sure that you preserve a thin cloth when you suck it on. You can also use the towel every time you blow to clean the AirPods. Try again to see if only one ear problem has been solved with the AirPods Pro.
2. Charge Your AirPods Pro
One of the simplest and fastest way to solve this problem is to ensure that you both charge AirPods. This way really works for me, so it’s working for you hopefully.
Typically one of your AirPods is running out and the other still plays on one ear. The other is charged.
If you charge the two AirPods in some situations, one of them will not be paid. Either this happened or only one battery ran out.
The two AirPods must be put in your case and attached to an original cable. Wait about 10 minutes after you have done this to charge them.
You can now take both of them out and see how this strategy succeeded. If only one of your AirPods still has sound/music, then proceed to the next solution.
3. Forget And Pair Again
You may have corrupted the Bluetooth communication settings of your AirPods Pro and Apple device. This occurs usually if the communication is disrupted between them. You can do this in many ways—without the computer, if you tried to attach your AirPods Pro to another device, such as your Windows PC or Mac, or the AirPods Pro.
The good news is that the connection preferences and settings can be rebuilt.
How do you do it, here’s:
- Go to your iPhone or iPad Settings first and then tap Bluetooth.
- Tap next to the (i) button of your Airpods pro, tap Forget This Device and then confirm it.
- Go back to your case, put the earbuds in the slot correctly, and leave the lid open.
- Check your home screen for your iPhone or iPad, and bring your AirPods Pro case near your device until the animation is shown on your screen.
- Tap the Connect option on your iPhone or iPad to finish the settings, and follow the remaining instructions.
Now the Bluetooth communication settings of both devices have been repaired, both AirPods are expected to be working properly now. Make sure that both AirPods Pro batteries are full before you do this. This will fix AirPods Pro Only Playing in One Ear problem.
4. Check The Stereo Balance
Your iPhone has a setting that can solve this issue directly. Stereo Balance addresses the propagation of sound between iPhone-linked headphones.
If the Stereo Balance is wrong, AirPods can play sound out of a single ear.
To check the balance of your stereo:
- Go to your Settings
- Scroll down and Tap General
- Tap Accessibility
- You’ll see a slider that stands for Right and Left with letters R and L. Ensure the sound is distributed equally with the slider in the middle. After you’ve done this, check if the trick has been done.
- Turn off the Mono Audio button. Leave it as it is if already off.
If you’re on Mac:
- Tap system preferences > Sound > Output.
- In the Sound Output menu pick your AirPods
- Ensure that the slider is in the center of L&R
- Return to Systems preferences and press Accessibility.
- Scroll down and select Audio and uncheck Mono Mode.
5. Disable Audio Transparency Feature
Another function to consider is the noise cancelling capabilities of the microphone.
This feature can be found on iOS/iPadOS 13.2 devices and later versions of the app. Therefore, before continuing, you must make sure that your iPhone or iPad operates on the correct edition.
One of the “Noise Control” options is called “Audio Transparency” which allows you to hear your environment. But this is going to confuse you with the sound of your computer.
Here’s how do you prevent it:
- Keep going and tap on your iPhone Settings.
- Then tap the Bluetooth and check the list of devices for your AirPods Pro.
- Tap on the (i) icon next to the name, then tap Noise Control.
- Tap the Noise Cancelation option to enable it.
One of the drawbacks to audio transparency is that due to the ambient noise it might not be possible to listen properly. You need to deactivate this feature and instead select Noise Cancelation to ensure you have an accurate hearing on your earbuds.
6. Reset AirPods Pro
There is a chance that it has corrupted your AirPods Pro. It usually happens for a really long time when you use it and may sometimes hang out.
But not to worry, by resetting your device, you will be able to repair it. You will be able to use new and fresh settings for connections by doing this.
Here’s how it can be done:
- Go ahead and firmly put your earbuds in the case and close the lid. Wait approximately 30 seconds and open the case’s door.
- Now, on the back of the case, press and hold the Setup button before the LED light inside the case briefly flashes amber and then steadily white.
- To finalize the restoration process, then close the lid of the Airpods case.
- Open the lid of the AirPods Pro case again after a few seconds to begin the pairing process.
- Go back to your iPhone or iPad’s home screen and put your AirPods Pro case next to it until the screen shows a setup animation. Know all about what to do if you are having trouble.
- Finally, on your iPhone or iPad, tap the Link option, and follow the instructions to finish the setup process.
It should function correctly now, having refreshed the communication settings between your devices and AirPods Pro. That includes both earbuds, which on both ears should work equally, and fix AirPods Pro Only Playing in One Ear.
7. Turn On Noise Cancellation Feature
It is likely that your “Noise Cancellation” function does not work properly. In the Apple Support Communities thread for this topic, this was a common occurrence and frequently reported cause among users.
If the system is compromised, the most possible reason for this to happen is. What could cause file settings to corrupt is unknown, but there is a solution. Reconstruction of “Noise Cancellation” settings on your iPhone or iPad is one way you can easily try to restore them.
Here’s how it can be done:
- Go ahead and go to the iPhone, iPad, or iPod Settings section.
- Tap the Accessibility option, then scroll down to the Physical and Motor section. Tap AirPods or AirPods Pro.
- Next, find the Noise Control section and tap on the One AirPod option for Noise Cancellation.
- Finally, if the function works well, test it with one of your earbuds. Until the test is completed, disable the function.
You were able to reset the noise cancelation feature on both of your earbuds by doing this procedure. As a consequence, without the confusion of noise around you, you would be able to hear precisely the sound coming from your system.
8. Update to the Latest Software Version
If they are on an outdated firmware update, your AirPods Pro won’t fit. This is also claimed by Apple itself, as we described above, that only devices running iOS 13.2/iPadOS 13.2 and later are compatible with AirPods Pro.
It may be a flaw that is incompatible with the latest models since they are not added to older versions of iOS/iPadOS, which eventually causes some AirPods synchronization and Bluetooth problems.
In addition, Bloomberg reported that the iOS 13 stability updates will be released over the coming months by Apple to combat (damn, what a word) and patch up things, including what causes AirPods Pro to act funny.
Here’s how (if you didn’t already know) you can update your iPad or iPhone:
- Use your iCloud or iTunes/Finder to backup your Apple computer. Read more here on how your device can be backed up.
- To prevent disturbance, link your device to power and connect to the Internet via Wi-Fi.
- Tap the Settings button, then General
- Pick Software Update.
- Tap Download and Install. Prior to restarting the system, you will be asked to enter your device’s passcode.
You should upgrade your iPhone or iPad to the new version of your operating system to be able to do that. If you are not aware, learn more about how to update your Apple devices by doing this. Connect your AirPods Pro to your iPhone or iPad after the upgrade process, and it will upgrade automatically to the new firmware update.
9. Check Using Other Bluetooth Headphones
If you are still not sure if your AirPods Pro or Apple device triggers the problem, then try using other Bluetooth earphones to show that your Apple device is working properly.
If they have Bluetooth earphones or headphones that you can test on your mobile, check with your family or friends.
You should also verify that you have the right stereo settings after that. For that procedure, you can refer to Method 4 (above) of this guide.
Try resetting your Apple device in such a situation where the issue is with the Apple device and not your AirPods Pro. This will NOT delete all of your contacts, details, and records, but only the preset settings that you might have set in the Settings app instead.
Here’s how it can be done:
- Go ahead and tap the Settings option on your iPhone or iPad, then General, and then Reset.
- Then, find the Reset All Settings option and tap it.
- Next, if necessary, input your passcode for your device.
- Finally, to finalize the procedure, tap Confirm.
- Try to reconnect the AirPods Pro to the system to see if the problem continues.
10. Contact Apple Support
If despite all the approaches above, you are still having the same problems, you have done your part. It’s time for the experts to come in and inspect the piece. App;e-certified technicians will need to check whether the product is faulty from your nearest Apple Store. You should check the warranty option after that process and ask for a replacement.
But if you find you need any guidance with the above strategies, you can still contact an Apple representative over the phone. As described above, you should recommend the strategies that you need to do so that they can direct you every step of the way.
You can give feedback to Apple Developers if you have suggestions to improve the AirPods Pro functionality. That way, they’ll know what more of the product their customers want. We hope we have been able to help solve your “AirPods Pro only playing in one ear” problem before we close this post. Please feel free to leave a comment below if you have questions, and we’ll love to help you out.